產品特色
WLA-210X
WLA-210XSUB
DUAL 10" DRIVER | 雙 10吋單體
WLA-210X 的核心是由 2 個定制的 Wharfedale Pro 10 英吋中低音單體所組成，另外具備了 4吋的音圈以確保高效率和高功率處理。
高頻處理的部分也是由 Wharfedale Pro 定制的高音號角所提供。
使用釹磁鐵和 3.0" 音圈，此壓縮驅動器耦合到 100° x 10° 波導，為 WLA-210X 系統提供了令人難以置信的聲音表現和功率處理能力。
At the heart of the WLA-210XF are 2 x 10″ custom Wharfedale Pro LF drivers.
These feature 4.0″ voice coils to ensure high efficiency and high power handling.
The HF Compression driver is also custom made by Wharfedale Pro. Using a neodymium magnet and a 3.0″ voice coil, this compression driver is coupled to a 100° x 10° waveguide.
These custom designed transducers are what give a WLA-210X system its incredible sound and power handling capacity.
優化地面堆疊
WLA-210X 系列索具兼作優化的地面堆棧系統，使用 WLA-210FXSUB 超低音揚聲器作為底座。
WLA-210X 線性陣列單元可以向下傾斜 10° ，以利覆蓋舞台周邊的觀眾區域，也可以向上傾斜 10° 以更好地將聲音傳遞至遠處的座位區。
可選的 WLA-210XF 通用吊架能夠負載多達 8 個 WLA-210XF 單元加上一個 WLA-210XSUB 超低音單元。
吊架採用不銹鋼結構製成，表面部分也噴塗防銹材料處理，對場地條件的寬容度大幅提升。
WLA-210X rigging doubles up as an optimised ground stacking system, using the WLA-210XSUB subwoofer as a base.
Arrays of WLA-210X line array elements can be aimed downwards by as much as 10° to cover audience areas close to a stage, as well as upward by as much as 10° in order to better cover distant balcony seating areas.
Bi-Amp & Passive Mode | 雙擴大器和被動模式
在BI-AMP模式能為揚聲器內的每個單體提供最佳的運作功率。
在 BI-AMP 配置中，外部分頻器用於分離頻率，並將訊號分配到專用的低頻擴大機和高頻擴大機。
這樣，每個擴大機僅在固定的頻率範圍內工作，進而為揚聲器內相應頻率的單體供電。
在被動模式下，單個擴大機可用於為揚聲器內的所有單體供電。
揚聲器的內部分頻器將頻率分離，將正確的頻率傳遞給相應頻率的單體。
在 2 音路被動式揚聲器的示例中，這意味著單台擴大機同時為揚聲器內部的高號角和低音單體供電。
In BI-AMP mode, two power amplifiers can be used. This gives you the advantage of being able to select the best power amplifier specifications for each driver inside the loudspeaker. In a BI-AMP configuration, an external crossover is used to separate the frequencies and this splits the signal to the dedicated LF amplifier and the HF amplifier. This way, each amplifier is only working on the given frequency range and, in turn, is powering the corresponding driver inside the loudspeaker.
In PASSIVE mode, a single amplifier can be used to power all drivers inside the loudspeaker. The full frequency range is put into the loudspeaker and the loudspeakers’ internal crossover separates the frequencies, delivering the right frequencies to the right driver. In the example of a 2-way passive loudspeaker, this means that the single amplifier is powering both the HF compression driver and the LF transducer. The internal crossover takes care of both the frequency and power separation.
Amplifier & DSP | 擴大機和音場處理器
強烈建議使用 Versadrive DSP（例如 SC-48 FIR）或具有內部 FIR 濾波功能的 DP-N 系列擴大機，以發揮 WLA線性陣列揚聲器最大的潛能 !
JUST IMAGINE | 想像一下...
想像一下您的夢想系統！您可以配置 WLA-1 系列以滿足您的需求！ 以下是解決方案！
為幫助您進行設計和系統準備，您可以下載一些推薦的系統圖。
這些範圍從小到大，並使用我們不同的擴大機系列。
規格表
